ps3 ps jailbreak

 ni set ps3 aku yg baru sampai sabtu lepas..sejak dari sabtu sampai sekarang ni aku main tak sampai 10 minit..kepale pusing bila tgk tv..kalau diikutkan aku dah lama tak tengok tv..dekat 6 tahun..langsung taktau hal dunia..betul2 hidup depan meja,baca buku,main wheelie vespa pastu duduk kat maplay usha wifi T.T idop aku da macam orang utan.. 

usb psjailbreak ps3..

cara guna

Jailbreak your PS3 in easy to follow steps given below, once jailbroken you can play any PS3 games without inserting the original game disc.

Requirements:

1. PlayStation 3 Console running firmware 3.41 or above.
2. PS Jailbreak USB Modchip
3. An external USB drive formatted to FAT32.
4. Download Backup Manager file from here, and transfer it to the external USB HDD.
5. Original disc of any PS3 game which you want to backup.

Step 1. Remove any discs from your PlayStation 3 console and then turn the machine off. If your PS3 is a FAT model then turn off the power switch found at the backside of the console. If your PS3 is a SLIM model then first remove the power chord before plugging in the USB.

Step 2. Plug in the USB Modchip to any USB port on your PS3 console. After pluggin in the PSjailbreak USB ModChip power on the console and quickly press the “Eject” button. Now you can notice the two LEDs turned-on on the USB as the console is loading.

1. When the USB LED light turns Green it means that your PS3 has been jailbroken and now you can play games without original discs.
2. If the USB LED turns red, then it means that the process failed and you will have to start the process again. Power On and then quickly press the “Eject” button with USB Modchip already plugged in.

If the LED light on the USB turns green, you are good to go as the PS Jailbreak has been successfully loaded.

If the LED turns red, then it means that the PS Jailbreak Modchip didn’t load successfully. This usually happens when the Power and Eject button sequence wasn’t performed properly. Start from Step 1 again if you end up having the red light.

Step 3: Once the console has finished booting up with the PS Jailbreak Modchip, plug-in the external USB storage device which has the "Backup Manager" setup to the console’s USB port.
Step 4: Now navigate to the "Game Menu" and select the option "Install Package Files" and then select "manager.pkg" file. This will basically install the “Backup Manager” application that you download earlier to your hard drive.

Step 5: When the "manager.pkg" file is done loading, scroll all the way down in the “Game Menu” and there you should see a new application called "Backup Manager", run it.

Step 6: Now we’re in the Backup Manager app. Insert the game in the console’s optical drive which you want to backup. Press “O” and you will be asked where to make the backup, on the internal HDD or the external storage source connected via USB. This process is further elaborated by the following screenshots.

Step 7: In order to play a game via the backup you just made, insert any original game disc into your console (To emulate the loading process), run "Backup Manager" in the "Game Menu". Press “X” to play the selected backup game.

Step 8: Now you will be taken back to the main menu. In the "Game Menu" you will see the game which you have backed up. Now you can select the game, and run it without having the disc in the console’s drive.



Oh and you must make sure that the PS Jailbreak USB Modchip is connected to your console at all the times when you are playing the games via backups.
Disclaimer: This guide is for educational purposes only. I’m not responsible for any loss of important data or malfunctioning of your Game Console.

hehehee aku tak support piracy..tak galakkan dan tak peduli pasal piracy..aku main gameboy je tiap hari..

tutorial ini telah di copy paste dari website lain..tak perlu peduli yang bahagian bawah..hanya perlu faham step 1 dan step 2.....